 |
The Type-36 is one of the smallest and fastest core alignment fusion splicers available today. It’s a portable, fully automatic, self-contained instrument for creating low-loss optical fiber splices in both field and factory environments. Sumitomo’s innovative dual microscope fiber observation system eliminates the need for mirrors, providing faster operation and reduced damage potential. It is designed to work with a variety of fiber types including single-mode, multimode, dispersion shifted, and other specialty fiber. Type-36 is the only fusion splicer in the industry offering an optional modem for splicer remote interactive maintenance (S-RIM).
HDCM (High-resolution Direct Core Monitoring) image processing software in the splicer is used to perform core alignment and estimates the splice loss. The splicer automatically aligns a pair of fibers in both the X and Y (horizontal and vertical) planes and then fuses them together with heat from an electric arc to form a low-loss splice.
- 25-second Average Splicing Cycle Time
- Portable, Fully Automatic Splicing With Loss Estimation
- The Dual Microscope, Mirror-Free Fiber Observation System Speeds Up Cycle Time and Increases Optical and Mechanical Reliability
- Simple Clamping Fiber Chucks Hold Up to 900 Micron Fiber
- Splicer Remote Interactive Maintenance (S-RIM), Allows Software Upgrades and Machine Diagnostics via High-Speed Modem, Reducing Downtime and Keeping Your Splicer on the Job
- Largest Image Magnification Available (280x)
|
Alignment Method
|
Core Alignment — High-resolution Direct Core Monitoring (HDCM)
|
Fiber Requirement
|
Silica Glass
|
Profile Type
|
SMF, MMF, NZ-DSF, CSF, Er-doped Fiber
|
Cladding Diameter
|
80 to 150µm
|
Coating Diameter
|
250 to 900µm
|
Cleave Length
|
9 to 16mm
|
Typical Splice Loss, Identical Fibers
|
SMF: 0.02dB
MMF: 0.01dB
NZ-DSF: 0.05dB
|
No. of Fusion Condition Settings
|
35 Total (5 fiber categories
with 7 program selections each)
|
Splice Parameters
|
5 Adjustable Parameters
|
Arc Test Compensation
|
Automatic
|
No. of Heater Condition Settings
|
10
|
Menu Selection
|
User Friendly ‘Drop-Down’ Menus
|
Typical Splice Cycle Time
|
25 Seconds (set to loss estimate)
|
Typical Heater Cycle Time
|
90 Seconds
|
Proof Test
|
Standard, 200 Grams (0.44 lb)
|
Splice Data Storage
|
1,000 Splices (built-in memory);
30,000 Splices (w/opt. PC memory card)
|
|
|
Size
|
190W x 190D x 175H mm (7.4W x 7.4D x 6.8H in)
|
Weight
|
6.5kg (14.3 lb)
|
Power Requirement
|
Input: 100 to 240V AC; 50/60Hz, 12V DC
|
Display
|
Low Glare, 5.6 Inch Color LCD Monitor, 3 Possible Locations, 280X Magnification
|
PCMCIA Slots
|
Splicer Remote Interactive Maintenance (S-RIM): Transmit/receive data via mode m allowing factory-trained technicians to perform remote software upgrad es, troubleshooting and mainten ance funct
ions.PC Memory Card: 2 MB data storag e and local software upgrade with splice image storing capabilities.
|
Part Number
|
Description
|
Type-36
|
Type-36 Base Unit Fusion Splicer with Built-in Splicer Protection Sleeve Heater, includes:
• Shipping Case
• Spare Electrodes (ER-6)
• AC Power Cord
• V-Groove Brush (VGB-003-CR)
• Operation Manual
• Quick Guide
• Cooling Tray
• Training Video
• S-RIM Capable (does not include S-RIM modem, sold separately)
|
Type-36-KIT4
|
Includes all of the above, plus:
• Cleaver (FCP-22L)
• Stripper (JR-22)
• Splice Sleeves (FPS-1)
|
Please see Fusion Splicing Accessories for complementary products.
Products are subject to change without notice
|
|
